10 Q&As Of CCNA Certification Exam

1. What are two reasons that a network administrator would use access lists? (Choose two.)

A: to control vty access into a router
B: to control broadcast traffic through a router
C: to filter traffic as it passes through a router
D: to filter traffic that originates from the router
E: to replace passwords as a line of defense against security incursions

Correct Answers:  A, C

2. A default Frame Relay WAN is classified as what type of physical network?

A: point-to-point
B: broadcast multi-access
C: nonbroadcast multi-access
D: nonbroadcast multipoint
E: broadcast point-to-multipoint
Correct Answers:  C

3. A single 802.11g access point has been configured and installed in the center of a square office. A few wireless users are experiencing slow performance and drops while most users are operating at peak efficiency. What are three likely causes of this problem? (Choose three.)

A: mismatched TKIP encryption
B: null SSID
C: cordless phones
D: mismatched SSID
E: metal file cabinets
F: antenna type or direction
Correct Answers:  C, E, F

4. The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command?

A: This command should be executed from the global configuration mode.
B: The IP address 10.121.16.8 is the local router port used to forward data.
C: 102 is the remote DLCI that will receive the information.
D: This command is required for all Frame Relay configurations.
E: The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC.

Correct Answers:  E

5. Which type of attack is characterized by a flood of packets that are requesting a TCP connection to a server?

A: denial of service
B: brute force
C: reconnaissance
D: Trojan horse

Correct Answers:  A

6. Which of the following are associated with the application layer of the OSI model? (Choose two.)

A: ping
B: Telnet
C: FTP
D: TCP
E: IP

Correct Answers:  B, C

7. For security reasons, the network administrator needs to prevent pings into the corporate networks from hosts outside the internetwork. Which protocol should be blocked with access control lists?

A: IP
B: ICMP
C: TCP
D: UDP

Correct Answers:  B

8. What are two recommended ways of protecting network device configuration files from outside network security threats? (Choose two.)

A: Allow unrestricted access to the console or VTY ports.
B: Use a firewall to restrict access from the outside to the network devices.
C: Always use Telnet to access the device command line because its data is automatically encrypted.
D: Use SSH or another encrypted and authenticated transport to access device configurations.
E: Prevent the loss of passwords by disabling password encryption.

Correct Answers:  B, D

9. Which spread spectrum technology does the 802.11b standard define for operation?

A: IR
B: DSSS
C: FHSS
D: DSSS and FHSS
E: IR, FHSS, and DSSS

Correct Answers:  B

14. What are two security appliances that can be installed in a network? (Choose two.)

A: ATM
B: IDS
C: IOS
D: IOX
E: IPS
F: SDM
Correct Answers:  B, E

(No Ratings Yet)

 Loading ...